contact us

Telephone 0417-3500232

Fax 0417-3500568


Address (Add): No. 7, Second Street, Far Corner, West District, Yingkou City

Roller Line Characteristic Translator

Your current location: home >> NEWS >> Company news

Roller Line Characteristic Translator

Release date:2016-02-26 00:00 source: Click:


Roller Line Characteristics of Translator Conveyor Line Manufacturers, Translator Manufacturers, Automation Pipeline Equipment Characteristics

Roller conveyors are easy to connect and filter. Complex logistics conveying system can be composed of multiple drum lines and other conveying equipment or special units to meet various technological needs. The stacking drum can be used to realize the stacking and conveying of materials. The drum conveyor has the advantages of simple structure, high reliability and convenient use and maintenance.

Material of rack: carbon steel spraying, stainless steel, aluminum profile.

Power mode: deceleration motor drive, electric drum drive and other forms.

Transmission modes: single sprocket, double sprocket, O-belt, plane friction belt, synchronous belt, etc.

Speed regulation mode: frequency conversion speed regulation, stepless speed change, etc.

The dynamic drum line takes into account the tensile strength of the chain, and the longest single line length generally does not exceed 10 meters.

For custom drum conveyor, please call or confirm the following technical parameters:

1. The length, width and height of the conveying object;

2. The weight of each conveying unit;

3. The bottom condition of the conveyor;

4. Are there any special working environment requirements (e.g. humidity, high temperature, impact of chemicals, etc.)?

5. Conveyor belongs to powerless or motor-driven type.

In order to ensure smooth delivery of goods, at least three drums must be kept in contact with the conveyor at any point in time. Pallets should be transported when necessary for soft bags.

1. Choice of the length of the drum:

Cargo with different widths should be selected with suitable widths of drums. Generally, "conveyor + 50mm" is used.

2. Choice of wall thickness and shaft diameter of drum:

According to the weight of the conveyor, it is evenly distributed to the contact drum, and the required load-bearing capacity of each drum is calculated, so as to determine the wall thickness and shaft diameter of the drum.

3. Drum material and surface treatment:

According to the different conveying environment, the material and surface treatment (galvanized carbon steel, stainless steel, blackening or gluing) of the drum are determined.

4. Choose the installation method of the drum:

According to the specific requirements of the whole conveyor, the installation methods of the drum are selected: spring pressing type, inner tooth shaft type, full flat tenon type, through shaft pin hole type, etc.

For the conical drum of the bender, the width and taper of t

Related label:

Related product:

Related news: